Stuff For Sale

[Scooter Scott]

Want to give you all first shot at this stuff.
Shark Hook RSX Helmet size Medium. Used one track day, not a scratch.
http://i178.photobucket.com/albums/w260/scooterscott_photos/8acee2fd.jpg
http://i178.photobucket.com/albums/w260/scooterscott_photos/bcde00c1.jpg

A $400.00+ helmet. $100.00

H.A.R.D. Helmet assisted radar detection system for Escort radar detectors.
http://www.cyclegadgets.com/products/product.asp?Item=HARD
http://i178.photobucket.com/albums/w260/scooterscott_photos/cceac7da.jpg
Works well.Cost $160 Your s for $50.00

Stock 675 shock and spring. Got this for the Street Triple I never got.
http://i178.photobucket.com/albums/w260/scooterscott_photos/DSC00814.jpg
$100.00

I have 4 of these.
http://i178.photobucket.com/albums/w260/scooterscott_photos/DSC00818.jpg
make offers, as in free.

Shy King sliders.
http://i178.photobucket.com/albums/w260/scooterscott_photos/DSC00928.jpg
$40.00

GSG swingarm sliders.
http://i178.photobucket.com/albums/w260/scooterscott_photos/GSG.jpg
I cant find a price for these. How about $25.00? Sold

Teknic Speedstar gloves. size Large. Hardly used.
http://i178.photobucket.com/albums/w260/scooterscott_photos/DSC00925.jpg
Cost me $162.00 Sell for $75.00

Complete set of stock rearsets. If they are stock how can they be rearsets? Anyway, I great shape no major defects. Do I have to post a picture?
$150.00


I will leave these up here for a few days before I post them on the other site. Got a larger group of buyers there don't ya know.

PLUS SHIPPING

[asphaltscraper]

Dibs please kind sir.
http://i178.photobucket.com/albums/w260/scooterscott_photos/GSG.jpg

If I didn't have 2 helmets sitting here already I'd be all over that Shark too.

[Scooter Scott]

Dibs please kind sir.
http://i178.photobucket.com/albums/w260/scooterscott_photos/GSG.jpg

You have to drill the shift side out with an 8mm bit to get them to go through. In the mail tomorrow. Whats funny is I went through my address list and I have way too many from the forum. :laugh:

[asphaltscraper]

You have to drill the shift side out with an 8mm bit to get them to go through. In the mail tomorrow. Whats funny is I went through my address list and I have way too many from the forum. :laugh:


PM me your PayPal address. :thumbup:

[Scooter Scott]

I also have the plastic thing that goes over the muffler and the heat shield for it.
Freebees.

[Budo]

Can I have the plastic thing that goes over the muffler? :)

Went back and looked at that helmet... too bad it's a medium. Smokin deal for $100 ;)

[Scooter Scott]

Can I have the plastic thing that goes over the muffler? :)

Went back and looked at that helmet... too bad it's a medium. Smokin deal for $100 ;)

Sure. Send me an address and I will send it out today.

[Scooter Scott]

Can I have the plastic thing that goes over the muffler? :)

Went back and looked at that helmet... too bad it's a medium. Smokin deal for $100 ;)

Do you need the heat shield that goes under it?

[Budo]

Do you need the heat shield that goes under it?

I PMed ya... :)

I don't need the aluminum thing.

[Scooter Scott]

OK, everybody had a look, all 38 of us, going to the other site. Got my eye on a really cool jacket.

[FatherAzmodius]

Man, if I wasn't trying to raise cash for my wedding I'd be all over the helmet and radar assist.

[Scooter Scott]

The items are going up on the 675.net site tonight.
With higher prices.:coolgleamA:

[chimkychink]

if you don't mind shipping to the UK....obviously i'll pay...then i'll buy the sliders:thumbup:

[Scooter Scott]

Don't mind shipping over the pond. I will get a price for shipping tomorrow.

[Budo]

My stuff came in today...

Not only was it bombproof (the packing), it also came with some free t-shirts... :)

You are the best Scott!!

[Scooter Scott]

My stuff came in today...

Not only was it bombproof (the packing), it also came with some free t-shirts... :)

You are the best Scott!!

I have been trying to get rid of the T-shirts for some time now. They are tooo big for me and after seeing some of your pics I thought they might fit.

[asphaltscraper]

Got my sliders today too, thanks Scott. :thumbup:

[Budo]

I have been trying to get rid of the T-shirts for some time now. They are tooo big for me and after seeing some of your pics I thought they might fit.

Uh... thank you? :laugh:

And yes... they fit.

[Scooter Scott]

Got my sliders today too, thanks Scott. :thumbup:

Cool. The USPS will work better noww that we have a new pres. :thumbup:


Uh... thank you? :laugh:

And yes... they fit.

Enjoy.

[Wbkelso]

What radar detector did you use the HARD for?

[Scooter Scott]

What radar detector did you use the HARD for?

Escort 8500

[Budo]

Hey Scott... do you still have those projector lenses for the headlights?

I think I damaged mine in a tipover @ Deals Gap... Looks like the glass dome hit the housing and chipped a little of it off...

[Scooter Scott]

Hey Scott... do you still have those projector lenses for the headlights?

I think I damaged mine in a tipover @ Deals Gap... Looks like the glass dome hit the housing and chipped a little of it off...

Let me know what you need, I have several lenses.

Ouch, the gap claims another one.

[asphaltscraper]

I think I damaged mine in a tipover @ Deals Gap... Looks like the glass dome hit the housing and chipped a little of it off...


Is that the one on the right side as you look at the front of the bike? If that was chipped off it was a really clean break. :nod:

[Budo]

That's the only thing I can come up with Chip...

there's no way that heat from an HID bulb can generate enough heat to chip off a piece from a glass dome like that (at least that's my theory).


Let me know what you need, I have several lenses.

Ouch, the gap claims another one.

I never lowsided... it happened about 25 miles from the gap at the entrance to our cabin. I passed the entrance road and the road had a pretty severe incline... Instead of waiting for it to level out I opted to just turn around there, which would not usually be an issue but I had my tankbag on which cuts my clearance when it comes to making tight turns. So I couldn't make the complete turn, big deal right? just put your foot down, back up and continue...? Well I went to put my left foot down, and the ground just was not there because of the incline... when I finally found asphalt the bike was already leaned too far over and I let her down as gently as possible. I almost shoved my body under it, but considering that I just F*ed up my ankle a few months back, I didn't want to risk injuring another leg :P

First inspection revealed no damage, other than a few little scratches on the frame sliders... but later on Chip pointed out that my projector bulb has a chip in it :P


Long story short, I want one of the bulbs please :)

[Scooter Scott]

Thats the low beam side, Correct?

[Scooter Scott]

And when are you going to do a trip report? Whit lots of pictures I hope.

[Budo]

Thats the low beam side, Correct?

Si Senor


And when are you going to do a trip report? Whit lots of pictures I hope.

I didn't take as many "on the road" pictures this year, but I did make up for it in barber and deals gap pictures...

A short write up (shorter than previous years) will accompany it :ooh:

[Scooter Scott]

On its way tomorrow.:thumbup:

[Budo]

On its way tomorrow.:thumbup:

No rush scott, I won't be able to get to it for at least a few weeks anyway. Lemme know what I owe ya ;)

[SpacemanSpiff]

this thread has been dead for 6 months?

[Scooter Scott]

dead as my computer. Shopping tomorrow.

[ShnikeJSB]

dead as my computer. Shopping tomorrow.

How much are you looking to spend and how soon? Best Buy will have a crazy deal on what is basically an upgraded version of this HP desktop (http://www.bestbuy.com/site/HP+-+Pavilion+Desktop+with+AMD+Athlon%26%23153%3B+II+X 4+Quad-Core+Processor/9549401.p?PID=1234320&id=1218122580360&ci_sku=9549401&ref=39&ci_src=11138&loc=01&URL=http://www.bestbuy.com/site/olspage.jsp?skuId=9549401&type=product&id=1218122580360&ci_src=11138&ci_sku=9549401&AID=10474050&skuId=9549401) for $499, and it even includes a 20" monitor and printer!

It will come with an AMD X4 Quad-Core processor, 8GB Memory (a crapload), a big 1TB Hard Drive, the 20" widescreen monitor, HP Deskjet DJ530 Color Printer, and Windows 7 Home Premium = $499. It normally would cost about ~$820 with those upgrades. That would be plenty fast and could last you quite awhile with those specs. :thumbup:

[Scooter Scott]

Back on line with a spiffy little Dell notebook. Free, thank you very much. My geek is extracting the bidness data and I will be shopp after the first of the year.

[Marko]

I was actually looking at this

http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=4893207&csid=ITD&body=MAIN#detailspecs

now that I have lowered expectations.

[ShnikeJSB]

I was actually looking at this

http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=4893207&csid=ITD&body=MAIN#detailspecs

now that I have lowered expectations.

No kidding, "lowered expectations", LOL! It's a single-core CPU that's about as fast as a Pentium 4 @2.93GHz. Not to mention Windows XP, only 1GB RAM (even less available with the crappy/ancient/shared memory NVIDIA GeForce 6150 SE), no PCI-Express slots or available bays, only a 160GB HD, etcetera. Don't get me started on Tiger Direct! LOL! :laugh:

[Budo]

Hay Scott... did the gloves ever sell?

[Scooter Scott]

Hay Scott... did the gloves ever sell?

Holy crap! Ihad to go back and see what gloves I was selling back then. Yep, I still have them. Only one problem, they are in Tenn with my trailer. I'm going to try and get away next week and bring the bike and trailer back home if my customers will cut me a little slack. I'm sure I will not get any riding in on this trip as I have now waited till its too cold for my old blood to handle.

[Budo]

No rush at all Scott... I can't afford it for another month or two anyway. Can I call dibs though... need a new glove once it gets cold in Houston :D

[Scooter Scott]

I also have a pair of tecnic gloves that I had the same problem with, too short in the fingers.

Woot
I'm outta here first thing in the morning to fetch the Tona back home. Hope it don't snow on my Florida ass.:rofl3:

[DoubleApexx]

I also have a pair of tecnic gloves that I had the same problem with, too short in the fingers.

Woot
I'm outta here first thing in the morning to fetch the Tona back home. Hope it don't snow on my Florida ass.:rofl3:

Ride safely!

[Scooter Scott]

Ride safely!

Ride? I'm throwing it in the trailer. If its not too cold and the phone does not ring too much with customers bitching, I may stop in North Georgia and ride a bit.:yeehaw: